The secret behind building the pyramids

The secret behind building the pyramids

Orgonites are a combination of crystal and metal in resin and was founded by Wilhelm Reich in the 1930s. It transmits negative energy into positive energy. It brings a positive influence on the physical, mental, emotional and spiritual aspects of life. It has various names, such as Chi, Prana, Ether, or Life Force. Orgone pyramids balance the electrical signals around the body and bring harmony in our environment. Orgone pyramids are eye candy and are also highly sought-after devices as they are well-known for their ability to convert negative energy into positive energy and balance the body. 

It is noted that certain geometric shapes naturally produce a scalar field. Hence it is said that pyramids are known for amplifying and transmitting energy, like an antenna or speaker cone. Thus, the materials cast into the pyramid not only benefit from orgone energy but also the pyramid energy.

How to Make Orgonite

What you require:

Safety Equipment: Even though everything is safe, resin gives off dangerous and volatile fumes when the curing process takes place and can cause serious damage like lung cancer in the future. You must try to make orgonite outside and keep it away from any electrical equipment since its fumes are flammable. You should also wear an apron while working and avoid getting resin on your clothes. If you do get resin on your skin somehow, immediately wash it off with vinegar.

You require a Respirator mask, rubber gloves, an apron, Polyester resin, metal shavings, Quartz crystals, Pyramid Mold. Some things that you can use but aren't necessary are glitter, charms and some copper wire to wrap the crystals.

Steps:
1. You must put the metal shavings into the pyramid mould and fill it up halfway.
2. Add the quartz crystals to the metal and if you want, you can add other crystals too.
3. Then, you need to add from the package, the catalyst that you mix in the resin. It will tell you how much you how much to use. Generally, you will need 2-3% of the catalyst.
4. Always use plastic cups to mix the resin as cured resin is nearly impossible to clean off. Mix the resin for an entire minute.
5. Pour the resin into the mould and let it cure on its own. Do not take out the orgonite from the mould for at least 24 hours.

Now, depending on how you have made your crystal and what you have chosen to add, it makes look accordingly. Use it to your best benefits! 


Leave a comment

Please note, comments must be approved before they are published